Hydraulic Hammers/Breakers
 Main Features：

1. China made cylinder;

2. CATSU made  oil seal;

3. Full-closed housing to protect the main body;

4. Strong impact;

5. Longer lifetime of usage.

6. Quality breakers made of proper material: 20CrMo, 40CrMo, 42CrMo, 9Cr2Mo, Q355 etc. 

7. Compact and robust bracket to hold the hammer.

8. Top type, Side type, Box silent type optional.

9. Hammer quality guaranteed.

10. Hydraulic hammers come with 2pcs chisels, 2pcs hydraulic hoses, 1pcs Nitrogen bottle and gauge, 1 tool box and tool box.

Therefore, it is often used for demolition and rescue in various places, and is a commonly used crushing tool for fire brigade, traffic police, industrial and mining enterprises and other disaster relief and construction departments. It can also be used in construction demolition operations, reinforced concrete separation and other conditions.

Precautions for safe operation.
1.Proper position must be applied for an effective usage of breaking force. When position is incorrect,hammering energy of the piston is too weak to break rocks,

2.On the contrary,when position is excessive enough to break rocks with front of the base machine raised, the machine may suddenly tit forward the moment rocks are broken. Then, the breaker body or the end ofbracket may violently hit against rocks and result in damage.

3.lt is undesirable to carry out hammering under the below condition, because vibrations during hammering may be transmitted to tracks of the base machine. During hammering，however,proper position must be always applied to the breaker.Special care must be taken not to hammer under abnormal condition.

4.Do not use the breaker rod to move rocks. The stone claws are designed for this purposes.

5.Do not operate breaker when all components except rod are immersed in water and mud. Underwater usage of the breaker will cause internal damage to the breaker. Consult CATSU for modifications if you have an underwater requirement.

6.Apply same direction of boom force in line with the rod and place the rod in the rock with hammering surface as vertical as possible. lf hammering surface is oblique,the rod may slip during hammering. Thiscauses the rod to seize and to be broken and piston to be damaged. When breaking，fully stabilize therod first and then select the point of a rock on which hammering can be performed in a stable condition.

7.Do not use the breaker or breaker rods for lifting. Lifting eyes on the breaker are for storage and maintenance purposes only.

Bucket, CATSU, Excavator Bucket, Excavator Compactor, Excavator Ripper, Grading Bucket, Hydraulic Sweeper, Tiltrotator , Digging Bucket,  Grading Bucket,  Peel Grapple , Rotating Grapple, rake, ripper, drading beam, breaker, Excavator Fork, Screen Bucket Hydraulic Sweeper, Tiltrotator, Tilt Rotator , sweeper, mini excavator,  Proportional System